Full Length, Peer-Reviewed, Original Articles (published & in press)

1.        Shabana A. A., Hwang Y. L., and Wehage R. A., 1992, ”Projection Methods in Flexible Multibody Dynamics. Part I: Kinematics,” International Journal for Numerical Methods in Engineering, Vol. 35, pp. 1927-1939.

2.        Wehage R. A., Shabana A. A., and Hwang Y. L., 1992, ”Projection Methods in Flexible Multibody Dynamics. Part : Dynamics and Recursive Projection Methods,” International Journal for Numerical Methods in Engineering, Vol. 35, pp. 1941-1966.

3.        Hwang Y. L., and Shabana A. A., 1992, ”Dynamic of Flexible Multibody Space Cranes Using Recursive Projection Methods,” Computers & Structures, Vol. 43, No. 3, pp. 549-563.

4.        Shabana A. A., and Hwang, Y. L., 1993, ”Dynamic Coupling Between the Joint and Elastic Coordinates in Flexible Mechanism Systems,” International Journal of Robotics Research, Vol. 12, No. 3, 1993, June, pp. 299-306.

5.        Hwang, Y. L., and Shabana A. A., 1994, ”Decoupled Joint-Elastic Coordinate Formulation for the Analysis of Closed-Chain Flexible Multibody Systems,” ASME Journal of Mechanical Design, Vol. 16, pp. 961-963.

6.        Hwang, Y. L., 1996, ”Dynamic decoupling methods for the analysis of closed-loop flexible multibody systems”, Journal of Technology, Vol. 11, No. 3, pp. 355-364. (NSC 83-0117-C150-063-E)

7.        Hwang, Yunn-Lin and Wang, Yueh-Chen, 2002, ”Recursive method for the analysis of open-loop flexible multibody systems”, Journal of National Huwei Institute of Technology, Vol. 5, pp. 97-106. (NSC 86-2212-E150-002)

8.        Hwang, Yunn-Lin, 2003, ”Kinematic analysis of spatial deformable mechanisms using Newton-Euler iteration method”, Journal of National Huwei Institute of Technology, Vol. 6, pp. 89-98. (NSC 87-2212-E150-011)

9.        Hwang, Yunn-Lin, 2003, ”The vibration measurement and modal analysis of spatial open-loop deformable mechanisms”, MM Mechanical Technology Magazine, 2003, October, No. 224, pp. 148-155. (NSC 90-2815-C-150-017-E)

10.     Hwang, Yunn-Lin, 2004, ”The validation of transverse vibration modal properties for cantilever beam”, Journal of National Formosa University, Vol. 1, pp. 147-154.

11.     Hwang, Yunn-Lin, 2005, ”The vibration modal test and analysis of beam structure products”, Mechatronics Magazine, 2005, May, No. 81, pp. 136-140. (NSC 92-2622-E-150-008-CC3)

12.     Hwang, Yunn-Lin, 2005, “A new approach for dynamic analysis of flexible manipulator systems,” Journal of Nonlinear Mechanics, Vol. 40, No. 6, pp. 925-938. (NSC 90-2212-E-150-012)

13.     Hwang, Yunn-Lin, 2006, “Nonlinear recursive formulation for kinematic and dynamic analysis of robotic manufacturing systems,” Journal of Material Science Forum, Vols. 505-507, pp. 553-558. (NSC 93-2622-E-150-005-CC3)

14.     Hwang, Yunn-Lin, and Huang, Shen-Jenn, 2006, “Kinematic and Dynamic Analysis for Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method,” Journal of Material Science Forum, Vols. 505-507, pp. 1015-1020. (NSC 94-2212-E150-020)

15.     Hwang, S. J., Hwang, Y. L., and Lee, B. Y., 2006, “Using the Taguchi-Grey approach to optimize high speed end milling with multiple performance characteristics,” Journal of Material Science Forum, Vols. 505-507, pp. 835-840.

16.     Hwang, Yunn-Lin, 2006, “Recursive Newton-Euler formulation for dynamic manufacturing analysis of open-loop robotic systems,” International Journal of Advanced Manufacturing Technology, Vol. 29, No. 5, pp. 598-604. (NSC 87-2212-E150-011 & NSC 92-2622-E-150-008-CC3)

17.     Hwang, Yunn-Lin, 2006, “Nonlinear recursive method to solid deformable structure dynamic problems,” International Journal of Communications in Numerical Methods in Engineering, Vol. 22, No. 9, pp. 975-1002. (NSC 94-2212-E-150-020)

18.     Hwang, Yunn-Lin, 2006, “Kinematic and dynamic analysis of open-loop mechanical systems using nonlinear recursive formulation,” International Journal of Communications in Numerical Methods in Engineering, Vol. 22, No. 12, pp. 1129-1153. (NSC 93-2622-E-150-005-CC3 & NSC 94-2212-E-150-020)

19.     Hwang, Yunn-Lin, 2006, “Dynamic recursive decoupling method for closed-loop flexible mechanical systems,” Journal of Nonlinear Mechanics, Vol. 41, No. 10, pp. 1181-1190. (NSC 94-2212-E-150-020)

20.     Hwang, Yunn-Lin, 2008, “Decoupling joint and elastic accelerations in deformable mechanical systems using nonlinear recursive formulations,” International Journal for Numerical Methods in Engineering, Vol. 73, Issue 2, pp. 273-295. (NSC 94-2212-E-150-020)

21.     Hwang, Yunn-Lin, 2008, “Analysis of mechanical vibrations and forces using amalgamated decoupling method in multibody mechanical systems,” International Journal of Communications in Numerical Methods in Engineering, accepted to appear. (NSC 95-2221-E-150-018)

22.     Hwang Yunn-Lin, 2008, “Solid deformable multibody dynamic problems in precision manufacturing systems,” Key Engineering Materials, Vols. 364-366, pp. 873-878. (NSC 95-2221-E-150-018)

23.     Hwang, Yunn-Lin and Wei, Zhen-You, 2008, “Dynamic analysis and control of 3D flexible mechanisms using nonlinear recursive method in multibody automation systems,” Journal of the Chinese Society of Mechanical Engineers, accepted to appear.

 

Peer-reviewed Conference Papers & Abstracts

1.       Hwang, Y. L., and Shabana, A. A., 1992, “Decoupling Joint and Elastic Accelerations in Flexible Multibody Vehicle Dynamics”, Proceedings of CSME (Canadian Society of Mechanical Engineer) FORUM 1992, Montreal, Canada, June 1-4, 1992.

2.       Hwang, Yunn-Lin, 1993, “Dynamic Decoupling Methods Between the Joint and Elastic Coordinates in Flexible Mechanical Systems,” Proceedings of 10th Chinese Mechanical Engineering Conference, pp. 345-354, Taiwan.

3.       Hwang, Yunn-Lin, 1993, “Decoupling Methods in Flexible Multibody Dynamics”, Proceedings of 1993 ASME International Computers in Engineering Conference, San Diego, California, USA, August 8-12, 1993, pp. 93-96, Taiwan.

4.       Hwang, Yunn-Lin, 1994, “Computer-aided design and manufacture of rotor mechanism utilizing the geometric differential formulation”, Proceedings of National Science Council of Taiwan, Hsin-Ju, Taiwan. (NSC 84-2212-E-150-020 & NSC 85-2212-E-150-002)

5.       Hwang, Y. L., 2002, “Dynamic Analysis of Open-Loop Flexible Mechanical Systems”, Proceedings of the 26th Mechanics Conference of Chinese Society of Mechanics, Paper No. L006, Taiwan. (NSC 87-2212-E-150-011)

6.       Hwang, Y. L., 2003,  “Recursive Method for the Dynamic Analysis of Open-Loop Flexible Multibody Systems”, Proceedings of the Fourth Symposium on Multibody Dynamics and Vibration, ASME2003 Conference, Paper No. 48368, Chicago, U.S.A., September 2-6, 2003. (NSC 90-2212-E-150-012)

7.       Hwang, Y. L. and Lin, Y. H., 2004, “The Validation of Vibration Modal Properties for Beam Structure Products”, Proceedings of the 2nd Conference on Precision Machinery and Manufacturing Technology, Paper No. 9321, pp. 316-321. (NSC 92-2622-E-150-008-CC3)

8.       Hwang, Yunn-Lin, Gau Wei-Hsin, 2004, “DYNAMIC RECURSIVE METHOD FOR THE FLEXIBLE MULTIBODY SYSTEMS”, Proceedings of the second Asian Conference on Multibody Dynamics (ACMD 2004), Paper No. 100022, pp. 104-111, Olympic Parktel, Seoul, Korea, August 2-4, 2004. (NSC 90-2212-E-150-012)

9.       Hwang, Y. L., Lin, Y. H., Lee, J. H., Ye, C. K., 2004, “Dynamic Analysis of Closed-Loop Flexible Mechanical Systems”, Proceedings of the 21th National Conference of Chinese Society of Mechanical Engineers, Paper No. C0501094, pp. 2695-2700, Taiwan. (NSC 92-2622-E-150-008-CC3)

10.    Hwang, Yunn-Lin, 2005, “Nonlinear recursive formulation for kinematic and dynamic analysis of robotic manufacturing systems”, Proceedings of 2005 International Conference on Advanced Manufacture, Paper No. H002, Taipei, Taiwan. (NSC 90-2212-E-150-012)

11.    Hwang, Yunn-Lin and Huang, Shen-Jenn, 2005, “Kinematic and Dynamic Analysis for Closed-Loop Flexible Manufacturing Systems Using Nonlinear Recursive Method”, Proceedings of 2005 International Conference on Advanced Manufacture, Paper No. P034, Taipei, Taiwan. (NSC 94-2212-E-150-020)

12.    S. J. Hwang, Y. L. Hwang, B. Y. Lee, 2005, “Using the Taguchi-Grey approach to optimize high speed end milling with multiple performance characteristics”, Proceedings of 2005 International Conference on Advanced Manufacture, Paper No. L021, Taipei, Taiwan.

13.    Hwang, Y. L., and Lin, Y. H., 2005, “The vibration analysis of simple supported Beam Structure Products”, Proceedings of the 2005 Conference of Chinese Society of vibration and acoustics, Paper No. C8, Taiwan. (NSC 93-2815-C-150-012-E)

14.    Hwang, Y. L., Ye, C. K., Lin, Y. H., 2005, “The vibration and modal analysis of food machine”, Proceedings of the 2005 Conference of Chinese Society of vibration and acoustics, Paper No. B11, Taiwan. (NSC 93-2622-E-150-005-CC3)

15.    Hwang, Y. L. Chou, S. Y., Chiu, C. C., 2005, “The vibration modal analysis of fixed-fixed  supported Beam Structure Products”, Proceedings of the 22th National Conference of Chinese Society of Mechanical Engineers, Paper No. C3-010, Taiwan. (NSC 93-2622-E-150-005-CC3)

16.    Hwang, Y. L., Lin, C. W., Chiu, C. C., 2005, “The dynamic analysis and simulation of food machinery”, Proceedings of the 8th National Conference of Chinese Society of Mechanism and Machine Design, Paper No. C06009, pp. 520-527, Taiwan. (NSC 93-2622-E-150-005-CC3)

17.    Hwang, Y. L., Liu, C. J., Chiu, C. C., 2006, “The computer-aided engineering analysis of electric scooters”, Proceedings of the 14th National Conference of Chinese Society of Automation Technology, Paper No. K03, Taiwan. (NSC 94-2622-E-150-003-CC3)

18.    Liu, C. J., Hwang, Y. L., Hsu, C. Y., 2006, “Development of the accelerated injection mold by using CAD/CAE/CAM”, Proceedings of the 14th National Conference of Chinese Society of Automation Technology, Paper No. K04, Taiwan.

19.    Hwang, Y. L., Chen, C. S., Chiu, C. C., 2006, “The dynamic stress simulation and vibration modal analysis of electric scooters”, Proceedings of the 14th National Conference of Chinese Society of Vibration and Acoustics, Paper No. C10_44, pp. C60-C69, Taiwan. (NSC 94-2622-E-150-003-CC3)

20.    Hwang, Y. L., Wang, H. C., Wu, B. Y., 2006, “The vibration modal analysis of cantilever Plate Structure Products”, Proceedings of the 14th National Conference of Chinese Society of Vibration and Acoustics, Paper No. D8_54, pp. D52-D59, Taiwan. (NSC 94-2212-E-150-020)

21.    Hwang Yunn-Lin, 2006, “Nonlinear recursive approach for the dynamic analysis and simulation of flexible automation mechanical systems”, Paper No. 0021a, pp. 359-366, Proceedings of 2006 ISFA, 2006 International Symposium on Flexible Automation, Osaka, Japan, July 10-12, 2006. (NSC 94-2212-E-150-020)

22.    Wei, Z. Y., Hwang, Y. L., Chiu, C. C., 2006, “Dynamic simulation and vibration modal analysis of the mechanisms and structures of electric scooters”, Proceedings of the 5th  Conference on Precision Machinery and Manufacturing Technology, Paper No. B3_000009, pp. 951-957, Taiwan. (NSC 94-2622-E-150-003-CC3)

23.    Hwang, Y. L., Lin, C. P., Ko, C. C., 2006, “The dynamic analysis of the structural properties of vertical CNC machine tools”, Proceedings of the 23th National Conference of Chinese Society of Mechanical Engineers, Paper No. C3-040, Taiwan. (NSC 95-2622-E-150-012-CC3)

24.    Hwang, Y. L. and Tong, G. R., 2006, “The dynamic analysis and simulation of IC surface speedy packing injection machine”, Proceedings of the 23th National Conference of Chinese Society of Mechanical Engineers, Paper No. C5-005, Taiwan. (NSC 95-2815-C-150-006-E)

25.    Hsieh, W. H., Hwang, Y. L., Pong, C. C., 2006, “Flexible motion simulation of jet propulsion mechanism for bionic jellyfishes”, Proceedings of the 23th National Conference of Chinese Society of Mechanical Engineers, Paper No. C1-003, Taiwan. (NSC 93-2212-E-150-028)

26.    Liu, C. C., Hwang, Y. L. Yang, H. C., Chang, G. D., 2006, “A study of slenderness ratio of boring bar”, Proceedings of the 23th National Conference of Chinese Society of Mechanical Engineers, D.III, Paper No. D10-005, Taiwan.

27.    Hwang Yunn-Lin, 2006, “DYNAMIC ANALYSIS METHOD FOR THE FLEXIBLE MULTIBODY SYSTEMS IN ENGINEERING EDUCATION”, Paper No. 91, Proceedings of 2006 International Conference on Science & Technology: Application in Industry & Education, Pulau Pinang, Malaysia, December 8-10, 2006. (NSC 95-2221-E-150-018)

28.    Hwang Yunn-Lin, 2007, “Solid deformable multibody dynamic problems in precision manufacturing systems,” Paper No. 216TW, Proceedings of Asia Pacific Conference on Optics Manufacture 2007, Hong Kong, China, January 11-13, 2007. (NSC 95-2221-E-150-018)

29.    Hwang Yunn-Lin, Wei Zhen-You, 2007, “Analysis of mechanical vibrations and forces using amalgamated decoupling method in multibody automation systems,” Paper No. CAMD 15, Proceedings of the Ninth International Conference on Automation Technology, June 13-15, Taipei, Taiwan. (NSC 95-2221-E-150-018)

30.    Wei, Z. Y. and Hwang, Y. L., 2007, “The light lifted mechanisms design and and analysis of large vehicles under wind pressure”, Proceedings of the 2007 ANSYS/Fluent Symposium, Paper No. 10, Taiwan.

31.    Hwang, Y. L. and Wei, Z. Y., 2007, “The inverse dynamic analysis and control of flexible robotic manipulators”, Proceedings of the 24th National Conference of Chinese Society of Mechanical Engineers, Paper No. B10-0016, Taiwan. (NSC 95-2221-E-150-018)

32.    Hwang, Y. L., Lin, P. W., Ko, Y. H., 2007, “The vibration measurement and modal analysis of cantilever Plate Structure Products”, Proceedings of the 24th National Conference of Chinese Society of Mechanical Engineers, Paper No. B11-0017, Taiwan. (NSC 95-2622-E-150-012-CC3)

33.    Hwang, Y. L., and Wei, Z. Y., 2007, “The inverse dynamic analysis and control of 3D flexible robots using recursive method”, Proceedings of the 10th National Conference of Chinese Society of Mechanism and Machine Design, Paper No. I03, , Taiwan.

34.    Hwang, Y. L., Lin, L. C., Wei, S. H., 2007, “The vibration measurement and modal analysis of the tensile machine platform”, Proceedings of the 10th National Conference of Chinese Society of Mechanism and Machine Design, Paper No. F06, , Taiwan.

35.    Hwang, Y. L. and Chen, H. H., 2007, “The external force responses on the exhaust system of extractor vehicle”, Proceedings of the 31th Mechanics Conference of Chinese Society of Mechanics, Paper No. H15, Taiwan. (NSC 95-2622-E-150-012-CC3)